🎉🎉Tecbaba Cup Holder 20%OFF Discount Event!(CODE: 7H8QQ2PI)

[Tecbaba]

Hello Jeep Owners! Tecbaba comes again!
Our interior CUP HOLDER is in warehouse. Click here to get more information:https://www.amazon.com/promocode/ABSJDOPFDF8BA
CODE:7H8QQ2PI
EVENT TIME:10/23 00:01-11/22 23:59
Original link: https://www.amazon.com/dp/B0FQBT8GMC
Features:
1. Fitment: Fits 2020-2025 Gladiator JT & 2018-2025 Wrangler JL 2/4 doors & JLU 4XE. *Not for Jeep Wrangler JK 4 doors&2 doors.
2. Protection: Full-coverage liner and revents scratches.
3. Grip: Non-slip silicone, holds drinks & bottles securely.
4. Clean: Remove & rinse clean. No scrubbing needed!
5. Install: No tools needed! Drop in & go!
6. Support: Satisfaction guaranteed! Contact us anytime.

Photos:

Know more about Tecbaba product information, tell us about your need? Click here and join our group!

Sponsored

 

[Y2KFirehawk]

Came across helpful review here (and ordered!)

 

[Tecbaba]

Came across helpful review here (and ordered!)

Yeah that's a wonderful review. Thanks for ordering!

 

[MTD]

dead link

 

[Rhinebeck01]

For those that might be interested, this terrific little add is again back in stock at Amazon. They sold out quick but are once again are available. No, not being sold at a discount presently...

Call me a frucking shill if you want (I could give a fruck) but this offering is a real nice add to the JL/JT. Even @Flip will tell you I am right saying this offering is real nice... Anyone else installed this offering that wants to chime in...

I as most other's here have always felt the JT/JL should have a removable center cup holder.

A cup holder you could use, have accidental soda and coffee spills into it and then you'd easily remove the cup holder to clean it.

As we all know the JL/JT cup holder cannot be removed... We've actually have had forum member's try to remove it to clean after a spill and well, they did lots of damage doing so and it cost them plenty of time and $ to replace the damaged cup holder..

This offering plugs right into the cup holder... takes 10 seconds to install... Just as easy as that. Looks factory.

Yes, a top notch offering from forum sponsor, @Tecbaba . And yes, it is worth the $ they are asking for it. After installing/seeing the offering I'd pay it.. fortunately, I was gifted mine though, as a Thank you from the forum sponsor.

Buy here:
https://www.amazon.com/dp/B0FQBT8GMC?m=A1UIMLYD56GTFM&ref=mpc_asin_title

Note: The Cup Holder insert does cover up the faint LED light you have coming from the bottom of the cup holder. No big deal to me, it is well worth the trade off to have a removable, cleanable Cup Holder Insert.

Pics do not do it justice...

 

[Tecbaba]

dead link

The promotion event is end now. You can jump to the Amazon page through: https://www.amazon.com/dp/B0FQBT8GMC

 

[Tecbaba]

For those that might be interested, this terrific little add is again back in stock at Amazon. They sold out quick but are once again are available. No, not being sold at a discount presently...

Call me a frucking shill if you want (I could give a fruck) but this offering is a real nice add to the JL/JT. Even @Flip will tell you I am right saying this offering is real nice... Anyone else installed this offering that wants to chime in...

I as most other's here have always felt the JT/JL should have a removable center cup holder.

A cup holder you could use, have accidental soda and coffee spills into it and then you'd easily remove the cup holder to clean it.

As we all know the JL/JT cup holder cannot be removed... We've actually have had forum member's try to remove it to clean after a spill and well, they did lots of damage doing so and it cost them plenty of time and $ to replace the damaged cup holder..

This offering plugs right into the cup holder... takes 10 seconds to install... Just as easy as that. Looks factory.

Yes, a top notch offering from forum sponsor, @Tecbaba . And yes, it is worth the $ they are asking for it. After installing/seeing the offering I'd pay it.. fortunately, I was gifted mine though, as a Thank you from the forum sponsor.

Buy here:
https://www.amazon.com/dp/B0FQBT8GMC?m=A1UIMLYD56GTFM&ref=mpc_asin_title

Note: The Cup Holder insert does cover up the faint LED light you have coming from the bottom of the cup holder. No big deal to me, it is well worth the trade off to have a removable, cleanable Cup Holder Insert.

Pics do not do it justice...

Hey, thank you for your feedback! We're planning more useful products so please stay tuned.

 

[virkdoc]

The promotion event is end now. You can jump to the Amazon page through: https://www.amazon.com/dp/B0FQBT8GMC

Please have a permanent forum discount so we dont have to wait for promotions.

 

[AFD]

I already have some decent cupholders for my JL, but was just wondering if this piece could actually contain a minor spill with the multiple holes cut out of it. Kinda hard to tell from the pictures. Also, not really sure why they'd cut out that many holes but not make one where it would let the LED light shine through.

Just for reference, below is a photo of my current cup holders, which are designed to contain a light/moderate spill, but nothing major. Nevermind, just took a closer look at their listing and it appears that those holes are located up pretty high and it looks like it would hold more spillage than the ones I'm using. Shame they don't have a version with a fancy red trim to match the stupid Rubi red theme I've been trying to keep

 

[Rhinebeck01]

I already have some decent cupholders for my JL, but was just wondering if this piece could actually contain a minor spill with the multiple holes cut out of it. Kinda hard to tell from the pictures. Also, not really sure why they'd cut out that many holes but not make one where it would let the LED light shine through.

Just for reference, below is a photo of my current cup holders, which are designed to contain a light/moderate spill, but nothing major. Nevermind, just took a closer look at their listing and it appears that those holes are located up pretty high and it looks like it would hold more spillage than the ones I'm using. Shame they don't have a version with a fancy red trim to match the stupid Rubi red theme I've been trying to keep

@AFD
Those red trimmed inserts can still be used with this cupholder liner. Consider ordering this liner... You can easily return if you don't like it. I'm telling you though, they are that nice and you won't be returning.

 

[AFD]

@AFD
Those red trimmed inserts can still be used with this cupholder liner. Consider ordering this liner... You can easily return if you don't like it. I'm telling you though, they are that nice and you won't be returning.

I actually never thought of using my existing cup holders inside this 1-piece liner. Smart thinking!

 

[Rhinebeck01]

I actually never thought of using my existing cup holders inside this 1-piece liner. Smart thinking!

@AFD

I am using my Tufskinz cupholder inserts with my Tecbaba liner. Fits great, looks really good...

 

[Tecbaba]

Please have a permanent forum discount so we dont have to wait for promotions.

I'm so sorry that we create the discount link through Amazon, and it can't make a permanent promotion event...

 

[virkdoc]

I'm so sorry that we create the discount link through Amazon, and it can't make a permanent promotion event...

Ah ok...well hoping for a Christmas discount then

 

[Flip]

@AFD

I bought one mainly because my cup holders were getting nasty from loose change, old gummy hand sanitizer, a sweet & sour container from Macdonald leaked. When it came time to clean them, I just sat there staring at them for awhile thinking, what! No inserts? What the heck am I supposed to do now!? It took me an hour to clean those cup holders out! I had to lay towels down, drag out the wet vac, find a working spray bottle. It was a PITA! I'm never going through that again. This will make life way easier.

Sponsored